Filter
Top Products
Table 4-3 BIOS Settings for HP ProLiant DL140 G2 Nodes (continued)
Set to This ValueOption NameSubmenu NameMenu Name
Disabled
Wake On LAN
Set the following boot order on all nodes
except the head node:
1. CD-ROM
2. Removable Devices
3. PXE MBA V7.7.2 Slot 0200
4. Hard Drive
5. ! PXE MBA V7.7.2 Slot 0300 (!
means disabled)
Set the following boot order on the head
node:
1. CD-ROM
2. Removable Devices
3. Hard Drive
4. PXE MBA v7.7.2 SLot 0200
5. PXE MBA v7.7.2 SLot 0300
Boot
Table 4-4 lists the BIOS settings for HP ProLiant DL140 G3 nodes.
Table 4-4 BIOS Settings for HP ProLiant DL140 G3 Nodes
Set to This ValueOption NameSubmenu NameMenu Name
Disabled
NumlockBoot FeaturesMain
Disabled
8042 Emulation
Support
Advanced
BMC
Serial PortI/O Device
Configuration
Enabled
Console RedirectionConsole Redirection
Enabled
EMS Console
115.2K
Baud Rate
Enabled
Continue C.R. after
POST
DHCP
IP Address
Assignment
IPMI/LAN Settings
Enabled
BMC Telnet Service
Enabled
BMC Ping Response
Enabled
BMC HTTP Service
Enabled
BMC HTTPS Service
Set the following boot order on the head
node:
1. CD-ROM
2. Removable Devices
3. Hard Drive
4. Embedded NIC1
5. Embedded NIC2
Boot
4.5 Preparing the Hardware for CP3000 (Intel Xeon with EM64T) Systems 65