HP (Hewlett-Packard) 3.2.1 Water System User Manual


 
3.3.6.1 ProCurve 2650 Switch
You can use a ProCurve 2650 switch as a Root Console Switch for the console branch of the
administration network. The console branch functions at a lower speed (10/100 Mbps) than the
rest of the administration network.
The ProCurve 2650 switch is shown in Figure 3-7. In the figure, white ports should not have
connections, black ports can have connections, and ports with numbered callouts are used for
specific purposes, described after the figure.
Figure 3-7 ProCurve 2650 Root Console Switch
Po rt
LED
Vi
ew
Sel
f
Te
st
Cl
ear
Re
se t
Fa
n
Status
4
5
48
47
46
45
43
4442
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
Spd mode: of f=1 0Mbps, fla s h=1 0 0Mbps, on=10 0 0Mbps
10/1 00Ba se
-T XPort s(1-48)
Gi
g- T
Po
rts
Mi
ni -
GB
IC
Po
rts
1 15 17
16
18
31
32
33
34
47
48
50
49
T
M
T
M
Po w er
Fa
ul t
hp pr oc ur ve
switc h
265 0
J4899A
Us
eonl yone( T o rM)fo rea chG ig abit po r t
!
1
2
3
Spd
Ln k
Ac
t
FD x
10/100Base-TX RJ-45 Ports
Uplinks from Branches
Start at Port 1 (Ascending)
Connections to Node Console Ports
Start at Port 41 (Descending)
Gigabit
Ethernet Ports
The callouts in the figure enumerate the following:
1. Port 42 must be reserved for an optional connection to the console port on the head node.
2. Port 49 is reserved.
3. Port 50 is the Gigabit Ethernet link to the Root Administration Switch.
Allocate the ports on this switch for consistency with the administration switches, as follows:
Ports 1–10, 13–22, 25–34, 37–41
Starting with port 1, the ports are used for links from Branch Console Switches. Trunking
is not used.
Starting with port 41 and in descending order, ports are assigned for use by individual
nodes in the utility cabinet. Nodes in the utility cabinet are connected directly to the
Root Administration Switch.
NOTE: There must be at least one idle port in this set to indicate the dividing line
between branch links and root node administration ports.
Ports 11, 12, 23, 24, 35, 36, and 43–48 are unused.
3.3.6.2 ProCurve 2610-48 Switch
You can use a ProCurve 2610-48 switch as a Root Console Switch for the console branch of the
administration network. The console branch functions at a lower speed (10/100 Mbps) than the
rest of the administration network.
The ProCurve 2610-48 switch is shown in Figure 3-8. In the figure, white ports should not have
connections, black ports can have connections, and ports with numbered callouts are used for
specific purposes, described after the figure.
52 Making Node and Switch Connections