HP (Hewlett-Packard) 3.2.1 Water System User Manual


 
See the HP BladeSystem Onboard Administrator User Guide for illustrations of interconnect bay
port mapping connections on half- and full-height server blades.
1.5 Supported Console Management Devices
Table 1-3 lists the supported console management device for each hardware model within each
cluster platform. The console management device provides remote access to the console of each
node, enabling functions such as remote power management, remote console logging, and remote
boot.
HP workstation models do not have console ports.
HP ProLiant servers provide remote management features through a baseboard management
controller (BMC). The BMC enables functions such as remote power management and remote
boot. HP ProLiant BMCs comply with a specified release of the industry-standard Intelligent
Platform Management Interface (IPMI). HP XC supports two IPMI-compliant BMCs: integrated
lights out (iLO and iLO2) and Lights-Out 100i (LO-100i), depending on the server model.
Each HP ProLiant server blade has a built-in Integrated Lights Out (iLO2) device that provides
full remote power control and serial console access. You can access the iLO2 device through the
Onboard Administrator. On server blades, iLO2 advanced features are enabled by default and
include the following:
Full remote graphics console access including full keyboard, video, mouse (KVM) access
through a Web browser
Support for remote virtual media which enables you to mount a local CD or diskette and
serve it to the server blade over the network
Each HP Integrity server blade has a built-in management processor (MP) device that provides
full remote power control and serial console access. You can access the MP device by connecting
a serial terminal or laptop serial port to the local IO cable that is connected to the server blade.
Hardware models that use iLO and iLO2 need certain settings that cannot be made until the iLO
has an IP address. The HP XC System Software Installation Guide provides instructions for using
a browser to connect to the iLO and iLO2 to enable telnet access.
Table 1-3 Supported Console Management Devices
Firmware DependencyHardware Component
CP3000
Lights-out 100i management (LO-100i), system BIOSHP ProLiant DL140 G2
LO-100i, system BIOSHP ProLiant DL140 G3
LO-100i, system BIOSHP ProLiant DL160 G5
Integrated lights out (iLO), system BIOSHP ProLiant DL360 G4
iLO, system BIOSHP ProLiant DL360 G4p
iLO2, system BIOSHP ProLiant DL360 G5
iLO, system BIOSHP ProLiant DL380 G4
iLO2, system BIOSHP ProLiant DL380 G5
iLO2, system BIOSHP ProLiant DL580 G4
iLO2, system BIOSHP ProLiant DL580 G5
CP3000BL
iLO2, system BIOS, Onboard Administrator (OA)HP ProLiant BL2x220c G5
iLO2, system BIOS, Onboard Administrator (OA)HP ProLiant BL260c G5
1.5 Supported Console Management Devices 29