Burnham K50 Boiler User Manual


  Open as PDF
of 116
 
9
a. Carefully join a Center Section with nipples in
adjoining section and bump lightly to secure.
b.Runnutapproximately8”ontwo(2)¾” draw-up
rods of equal length. (Note – more than one set of
draw-up rods are furnished on 8 section and larger
boilers).Placedraw-upchannelandoneatwasher
against nut.
c. Insert short end of draw-up rod through front & rear
nipple ports on both sections, see Fig. 5.
d.Placetwo(2)atwashers,draw-upchannelanda
nutoneachendofdraw-uprodsandngertighten.
FIG. 3
DUAL MANIFOLD BASES - 5015B THRU 5026B SECTION BOILERS
FIG. 4
LEH SECTION ON BASE
FIG. 5
ASSEMBLY OF CENTER SECTIONS
 previous next