Filter
Top Products
Home Automation,
Inc.
68
Press SHOW to advance the display to
HIGH SECURITY MODE.
In HIGH SECURITY MODE, the MAS-
TER CODE is always required to do
the following functions:
a. View or Change SET UP items.
(SET-UP key)
b. Create PROGRAMS. (PROG key)
c. View or delete PROGRAMS or
the EVENT LOG (SHOW key)
d. Access the system from a lo-
cal phone.
With HIGH SECURITY MODE off, no
code is required if the security
system is in the OFF mode. If the
security system is on (i.e. in the
HOME, ASLEEP or AWAY mode) then you
will be prompted to enter the mas-
ter code when you press the SET-UP,
PROG or SHOW keys.
If your system is set up with
HIGH SECURITY on, the display will
request the MASTER CODE whenever
you select one of these functions,
even if the security system is OFF.
Simply enter your master code.
Your system was shipped from the
factory with HIGH SECURITY off,
which allows you to change set up
items, create and delete programs
and view the event log without
having to enter your master code.
In most residential applications,
this is appropriate. If you have a
commercial installation, or would
like added protection from unautho-
rized access to the system, you may
wish to turn the HIGH SECURITY MODE
on.
To turn HIGH SECURITY MODE ON, press a
1 then ENTER. To turn HIGH SECURITY
MODE OFF, press a 0 then press ENTER.
ENABLE AUTO-BYPASS
The AUTO-BYPASS feature allows
the system to automatically bypass
an open zone when the system is
armed, rather than setting off the
alarm. In some applications, it may
be preferable to allow arming ONLY
if all zones are secure.
To turn AUTO-BYPASS ON, press a 1 then
ENTER. To turn AUTO-BYPASS OFF, press a
0 then press ENTER.
With AUTO-BYPASS OFF, all zones
to be armed must be secure when the
system is armed. Otherwise, the
console will beep three times and
display “ZONE NOT SECURE.” If the
system is armed and a zone is open
when the EXIT DELAY expires, the
alarm will sound.
You have now seen all items in
the CODES category. Pressing the
SHOW key again will cause the dis-
play to start over with the MASTER
CODE. Press CANCEL to return to the
SET-UP menu.
MISCELLANEOUS CATEGORY
To view or change items in the
MISCELLANEOUS category, press SET-UP,
2.
To see the next item in this category,
press SHOW. To see the previous item,
press SET-UP. To exit the set-up
facility, press CANCEL.
The first item in the MISCELLA-
NEOUS category is the ENTRY DELAY.