Filter
Top Products
Home Automation,
Inc.
66
IF YOU FORGET your master code
or if you have purchased a home
with a system whose code is un-
known, contact your dealer to have
a new code installed.
AUXILIARY CODES 1 - 4
There are 4 auxiliary codes.
To take an auxiliary code out of the
system, enter 0000 as the code.
Your first AUXILIARY code is
intended for maids, service people
or anyone who needs occasional
access to your premises. The first
AUXILIARY code can be switched on
or off on a time and day schedule.
For example, you may wish the AUX-
ILIARY code to be valid only on
Mondays, Wednesdays and Fridays
between the hours of 8 AM and 5 PM
to allow your house cleaner to turn
off the security system.
To change the AUXILIARY code, press the
SHOW key to advance the display to the
next item in the CODES category.
(You can press the SET-UP key to
go back to the previous item, MAS-
TER CODE.)
You may now enter a new four
digit AUX CODE #1, as described for
the MASTER code.
The AUXILIARY code can be used
to arm and disarm the system and
perform all other functions EXCEPT
bypass zones, change codes and
program the security system on or
off. If HIGH SECURITY mode is on,
then the auxiliary code cannot be
used to program, show or set-up
anything.
The AUXILIARY codes cannot be
used over a remote telephone. It
can be used over an in-house phone
(the Model 1503 System knows the
difference.)
AUX CODE #1 ON TIME
Press the SHOW key to advance the
display to AUX CODE #1 ON:
The display will show a time and
days, or the word NEVER on the
bottom line. You may enter a time
and one or more days of the week to
turn the auxiliary code on, and a
time and one or more days of the
week to turn the auxiliary code
off. Selecting 0 for days will
change the ON (or OFF) time to
NEVER. You must select at least one
day of the week to take away the
NEVER indication.
To change the AUX CODE ON time to 8:00
AM Monday, Wednesday and Friday, press
the DATE/DAY key. Press 1 (for MONDAY)
3 (for WEDNESDAY) and 5 (for FRIDAY.)
If you make a mistake and wish to clear
the days back to NEVER, press 0 and
start over.
As you enter the days, the dis-
play will show which day(s) you
have selected. When you are satis-
fied with the days, press ENTER.
The console will beep, indicating
that the new days have been ac-
cepted.
To change the time, press the TIME key
and enter the new time.
When you press the AM or PM key,
the new time will be accepted with
a beep, and the new time displayed.