Filter
Top Products
65
Model 1503 Owner's
Manual
MASTER CODE
The display will read "NEW MAS-
TER CODE: 0000-9999." You may now
enter a new four digit master code,
if you wish.
Enter the four new digits, which will
be echoed on the display. If you make a
mistake, press CANCEL.
The existing code will NOT be
changed until you have entered 4
new digits and pressed the ENTER
key. When the new code is accepted,
you will hear the console beep
once. The new code is now in perma-
nent storage and will never be
displayed by the system again.
REMEMBER YOUR NEW CODE!
Although you may change your
codes, the system will never allow
you nor anyone else to see the
existing code. You may only change
a code to a new code.
Your master code allows you to
do any and all functions from the
console and from the telephone. You
should not give your master code to
anyone who doesn’t need to know it.
If someone finds out what your
master code is, you should change
it.
Your master code was programmed
to 1111 at the factory. CHANGE IT
TO ANOTHER CODE IMMEDIATELY. Record
your new code and keep it in a safe
place.
through 7 for Sunday.
The console will beep as it ac-
cepts the new day of week.
If the console beeps 3 times and
erases the time or date you have
entered, the new time or date was
invalid (example, 13:00 PM). Try
again.
CATEGORIES
The next items that can be set
up are grouped into three catego-
ries: DIAL, CODES and MISCELLA-
NEOUS. Once you select a category,
there are numerous items in the
category that can be changed. To
advance to the next item in the
category, press the SHOW key. To
see the previous item in the cat-
egory, press the SET UP key. The
display will wrap around from the
last to the first and vice versa.
The items are listed below in
the order that they appear in each
category when pressing the SHOW
key.
CODES CATEGORY
To set up your CODES, press SET-UP,
1(Codes)
The display will request your
MASTER CODE.
Enter your master code.