Filter
Top Products
36
Home Automation, Inc.
Press the ENTER key.
The display will read “FRONT
PORCH ON - SUNSET MTWTFSS *IF”,
which means “Turn FRONT PORCH on at
sunset every day.”
Since this is what we want, press
ENTER.
The console beeps to indicate
that this program has been stored
and returns to the PROGRAM menu.
EXAMPLE 5: Program unit 2 (your
FRONT PORCH light) OFF at sunrise
Monday through Friday, and OFF at
10:00 AM Saturday and Sunday. This
is actually two programs.
Press PROG key (if you aren’t already
in the PROGRAM menu).
Press UNIT-NUMBER, 2 (or SHOW key
twice), OFF, TIME, AM, DATE-DAY, DATE-
DAY, WEEKDAYS, ENTER.
The display should read “FRONT
PORCH OFF SUNRISE MTWTF— *IF”. If
you make a mistake, press cancel
and start over from the menu that
you were on.
If the display reads as above, press
ENTER.
The console will beep as the
program is stored in memory. The
display will return to the PROGRAM
menu.
Press UNIT-NUMBER, 2, OFF, TIME, 1, 0,
0, 0, AM, DATE-DAY, DATE-DAY, WEEKENDS,
ENTER.
The display should read “FRONT
PORCH OFF - 10:00 AM ——SS *IF”.
want this program to run. 0=ONCE
means that it will only run once,
on the date that is entered if you
press the DATE-DAY key only once,
as you did in the previous example.
You may change back to a one
time program by pressing the DATE-
DAY key. The DATE menu will reap-
pear and you can enter the date for
a one time program. The DAY(S) will
be set back to ONCE.
For the purpose of demonstration, press
the DATE-DAY key again, and the display
will read “DATE: 11/08 MMDD DAY”,
where you can enter a date for a one-
time program. Press the DATE-DAY key
one more time to return to the DAY(S)
menu.
Now press 8 for weekdays.
The display top line will read
“DAY(S): MTWTF—”, indicating that
you have selected Monday, Tuesday,
Wednesday, Thursday and Friday for
this program to run.
Press 9 for weekends.
The top line now reads “DAY(S)
MTWTFSS”, indicating that this
program will run every day. You can
clear the days back to ONCE by
pressing 0 (try it and note the
display), or enter individual days
by pressing the keypad key marked
with the day. Try pressing 1 for
MON, 3 for WED and 5 for FRI. The
top line will read “DAY(S): M-W-F—”
indicating that this program will
run Mondays, Wednesdays and Fri-
days.
To complete this example, press
8 and 9 again, so that the top line
reads “DAY(S): MTWTFSS”.