Home Automation 1503 Home Security System User Manual


 
15
Model 1503 Owner's Manual
EMERGENCY BUTTONS
There are three buttons on the
console surrounded by a border
marked EMERGENCY. These buttons are
labeled FIRE, POLICE and MEDICAL.
There are actually two switches
under each of these buttons. Touch
each button lightly with your fin-
gertip and you will feel two bumps
under each one.
In order to activate one of the
emergency buttons, BOTH of these bumps
must be pressed simultaneously using
two fingers, and held for approximately
1 second.
The EMERGENCY buttons are always
armed. When an emergency alarm is
activated by one of the
pushbuttons, the red indicator for
that button lights up.
All emergency alarms are si-
lenced by pressing SECURITY-OFF and
entering your code.
There is a shortcut for MEDICAL
and FIRE emergency alarms, which
can be turned off using the CANCEL
key or the SECURITY-OFF key.
WHAT TO DO WHEN YOU COME HOME
Entry through a door:
- If you enter your home while the
system is armed in the HOME or
AWAY modes, using your normal
entry door:
- Console beeper comes on - dis-
play indicates “BURGLAR ALARM!
- ZONE NAME TRIPPED” If more
than one zone is tripped, then
the bottom line will show each
zone tripped for two seconds.
- Any lights or control modules
programmed to come on for the
door that you used will do so.
- The system will wait the ENTRY
DELAY time.
You should go to your console
(or telephone) immediately and turn
the security system off. If you
wish, you may go directly to HOME
or ASLEEP mode, rather than turning
the system OFF then back to HOME
(or ASLEEP.)
If you return home and hear the
alarm sounding, DO NOT ENTER. Use a
neighbor's phone to call for help.
WHAT HAPPENS WHEN THE ALARM IS
ACTIVATED
BURGLAR ALARM ACTIVATED:
- If someone enters through any
zone other than an ENTRY-EXIT
zone, or if the security system
is in the ASLEEP mode, or if the
security system is not turned
off during the ENTRY DELAY:
- The interior sounder is acti-
vated, which makes a loud, con-
tinuous sound.
- The ON FOR ALARM UNIT NUMBERS
are turned on.
- The FLASH FOR ALARM UNIT NUMBER
begins to flash on and off.