Filter
Top Products
39
Model 1503 Owner's
Manual
- Press PROG, * (for program a
button)
- Enter the button number, then
ENTER
- If a conditional is desired,
press *, then the conditional
(i.e. *, PM for “if dark”)
- Enter the command (i.e. UNIT-
NUMBER, 2, ON)
- Press ENTER to save the program
in memory.
Repeat this procedure for each
command that you want a button to
perform.
You can also name the button so
that a description of the button
appears on the display. (See SET
UP NAMES...)
EXAMPLE 1: Program button 3 as a GO
TO BED button, which will turn off
all lights, dim the porch light and
arm the security system in the
ASLEEP mode:
Press PROG.
The PROGRAM: menu will appear on
the display. One of the options is
* for BUTTONS.
Press *.
The display will read “PROGRAM
BUTTON #: 0 - 200 ENTER”.
Press 3, (or the SHOW key to scroll
through the buttons) then the ENTER
key.
The display top line will read
“PROG BUTTON 3:”. If the button
name “GO TO BED” has been set up,
the display will read “PROG GO TO
BED:”. The bottom line will read
“UNIT# ALL SEC 0-200 *IF”, indi-
cating that your next choices are
the UNIT# key, the ALL key, one of
the SECurity keys, another button
(0-200) or a conditional (*IF).
Press ALL, OFF.
The display will read “GO TO
BED: ALL OFF”
Press ENTER to commit this program to
memory.
The console will beep once and
return to the PROGRAM display. Now
we enter the next program for but-
ton 3:
Press *, 3, ENTER.
The display will again read
“PROG GO TO BED: UNIT# ALL SEC 0-
200 *IF”.
Press UNIT-NUMBER, 2 (or press the SHOW
key twice), * (for “dim” at this menu),
2.
The display will read “PROG GO
TO BED: FRONT PORCH DIM 2”
Press ENTER.
The console will beep and the
program will be entered into
memory. Now enter the final program
for button 3:
Press *, 3, ENTER
The display will again read
“PROG GO TO BED: - UNIT# ALL SEC 0-
200 *IF”.
Press the ASLEEP key, then enter your
MASTER CODE.