Filter
Top Products
54
Home Automation,
Inc.
control, then press the # key.
For example, 1, 0, #.
The Model 1503 will say “UNIT
NUMBER 10. COMMANDS ARE: 0: OFF, 1:
ON, 2: OFF FOR TIME, 3: ON FOR
TIME, 4: LO, 5: HI, STAR (*): CAN-
CEL.”
(If you enter a number that is
not a valid unit number then you
will hear three beeps and the Model
1503 will re-read the instructions
“ENTER UNIT NUMBER THEN POUND KEY”.
If you wish to cancel, press *.)
ON, OFF, TIMED ON AND TIMED OFF
COMMANDS
Press 0 to turn unit 10 off, 1 to turn
it on or the * key to cancel.
The Model 1503 will say ON, OFF
or CANCEL depending on what you
press. The Model 1503 will beep
once, indicating that it has done
what you asked, then go back to the
MAIN MENU.
Pressing 2 (OFF FOR TIME) or 3
(ON FOR TIME) will evoke the re-
sponse “ENTER TIME, THEN POUND
KEY”. Enter the time in minutes for
the OFF FOR or ON FOR command, then
the # key.
The system will confirm your
selection by saying “ON FOR (or OFF
FOR) (number of minutes you en-
tered)”, then beep once. You can
cancel by pressing the * key.
Pressing 4 (LO) or 5 (HI) will
evoke different responses depending
on the unit number.
DIMMING AND BRIGHTENING
For unit numbers 1 - 16 (and 81
- 128 on Version 2 systems) LO and
HI refer to dimming and brighten-
ing.
After entering the unit number and
pressing the # key, press 4 to dim or 5
to brighten the lamp.
The Model 1503 will lower the
light level one step for each
pressing of the 4 key, and raise
the light level one step for each
pressing of the 5 key.
When you are finished, press the * key.
You will return to the main menu.
For example, to dim unit number
5 two steps, press 1, 5, #, 4, 4.
Unit numbers 17 and 19 (and 20 -
80 on expanded Version 2 systems)
are either relay outputs or Model
1101 Programmable Energy Saver
Relays, and cannot be dimmed or
brightened.
MODEL 1101 PROGRAMMABLE ENERGY
SAVER RELAYS (PESM)
If you have one or more Program-
mable Energy Saver Modules in-
stalled, you can hear the tempera-
ture, turn it on or off and change
the high and low temperatures over
the phone.
To read the temperature of a PESM,
press 1 for home control, then enter
the unit number and the pound (#) key.
The Model 1503 will say “UNIT
NUMBER xx ENERGY SAVER IS (ON or
OFF): TEMPERATURE IS 76 DEGREES.