Filter
Top Products
37
Model 1503 Owner's
Manual
Press ENTER. The console will beep as
the program is entered into memory.
EXAMPLE 6: Program the security
system to OFF weekday mornings at
7:30 AM, IF it was previously armed
in the ASLEEP mode.
Press PROG key if you aren’t already at
the PROGRAM: menu.
Press (Security) OFF, then your MASTER
CODE.
Press TIME, 7, 3, 0, AM.
Press DATE-DAY, DATE-DAY, WEEKDAYS,
ENTER.
The display will now read
“PROGRM OFF 7:30 AM MTWTF—*IF”.
Now press *, ASLEEP.
The display will read “PROGRAM
OFF, 7:30 AM, MTWTF— IF ASL.” The
program is now conditionalized to
execute only if the system was
previously armed in the ASLEEP
mode. If you leave for vacation,
put the system in the AWAY mode,
and this program will not execute!
You can press ENTER to put this
program in memory, or CANCEL to go
back to the PROGRAM menu.
Press CANCEL so that this program is
not stored.
You can program unit numbers to
brighten and dim, and you can pro-
gram ALL LIGHTS ON and ALL OFF
functions by substituting ALL ON or
ALL OFF for the UNIT NUMBER ON or
OFF keystrokes. The display will
guide you.
Some other programming sugges-
tions:
- Program a radio or TV to come on
in your bedroom for workdays
only. No more forgetting to set
the alarm clock, no more alarms
on weekends.
- Program bedroom light on right
before bedtime, off at bedtime.
- Program lights on in kids rooms
when time to rise and shine for
school.
- Program a lighting schedule that
operates only when the security
system is in the AWAY model to
give the house a lived in ap-
pearance.
- Program the security system to
HOME at bedtime on weekdays, if
it was previously off.
PROGRAMMING THE SECURITY
SYSTEM
NOTE: In UL Listed Installa-
tions, timed or conditionalized
security system programs shall not
be used.
As you have seen in Example 6,
the Model 1503 offers the conve-
nience of programming the security
system on or off on a time sched-
ule. You can program the system ON
in the HOME mode on weekday nights
so that you can be assured of secu-
rity even if you forget to arm the
system, and OFF on weekday mornings
so that you don’t have to remember
to turn it off every morning.
There are two items to note in
programming the security system:
1. We suggest programming the
security system ON in the HOME
or AWAY modes, rather than the
ASLEEP mode, because there is no