Filter
Top Products
43
Model 1503 Owner's
Manual
To allow a program to only be executed
if time clock 2 is on/enabled, press *,
TIME, 2, ON.
To allow a program to only be executed
if time clock 3 is off/disabled, press
*, TIME, 3, OFF.
To allow a program to only be executed
if zone 5 is closed/secure, press *, 5,
OFF.
To allow a program to only be executed
if zone 13 is open/in alarm, press *,
13, ON.
To allow a program to only be executed
if the system is in a particular
security mode, specify the security
mode after *IF. For example:
To allow a program to only be executed
if the system is in the ASLEEP mode,
press *, ASLEEP.
The display will then show the
selected program conditional:
DISPLAY CONDITIONAL
blank always enabled
LIT if light
DRK if dark
T2E if time clock 2 enabled/
on
T3D if time clock 3 dis-
abled/off
5S if zone 5 closed/secure
13A if zone 13 open/in alarm
OFF if security mode is OFF
HOM if security mode is HOME
ASL if security mode is
ASLEEP
AWY if security mode is
AWAY.
When programming buttons, the
conditional must be selected before
the command for that button is
programmed.
Example 4: Turn the foyer light
on (unit 1) when the front door is
opened (zone 1, therefore button
11) if dark.
Press PROG, *(BUTTON), 1, 1, ENTER,
*(IF), PM, UNIT-NUMBER, 1, ON.
The display should read “PROG
WHEN Z1 ALM: IF DRK UNIT 1 ON”
Press ENTER to commit the program to
memory.
When programming timed programs,
the conditional can be added at any
time during the programming se-
quence.
Example 5: Program the living
room lamp (unit 7) on for 45 min-
utes at 6:30 PM Monday, Wednesday
and Friday if AWAY.
PROG, UNIT-NUMBER ,7, TIME 4, 5, ON,
TIME, 6, 3, 0, PM, DATE-DAY, DATE-DAY,
MON, WED, FRI, ENTER, *(IF), AWAY.
The display should read “LIVING
ROOM ON FOR 45 - 6:30 PM M-W-F IF
AWY”. Press ENTER if you wish to
commit this program to memory. The
living room light will only come on
if you are away, giving the house a
lived-in look.
The three Time Clocks are used
solely to define time periods dur-
ing the week when certain programs
should be enabled or disabled. For
example, it may be desirable to
conditionalize certain programs to
LIGHT 1 ON WHEN BUTTON 179
LIGHT 2 ON WHEN BUTTON 179
LIGHT 3 ON WHEN BUTTON 179
LIGHT 4 ON WHEN BUTTON 179