Filter
Top Products
48
Home Automation, Inc.
6. SHOW
The SHOW function allows you to
show the following items on the
display:
- Programs - all timed and button
programs
- Events - the 50 most recent
alarm system events
- Test - a test facility for the
zones
- Aux - the status of tempera-
tures, auxiliary inputs and out-
puts
SHOW PROGRAMS
You can show all of your pro-
grams or selected programs using
the SHOW PROGRAM function. When you
enter the SHOW PROGRAM function,
the console display will allow you
to see the entire list of programs,
or to see specific security, unit
number or button programs on the
display.
When you have selected only cer-
tain programs for display, the
other programs are “masked out”
(think of masking tape over the
programs you don’t want to see) so
that only the ones that you are
interested in are displayed.
Programs can also be changed and
deleted, if you wish, using the
SHOW function.
SHOW ALL PROGRAMS
The console display should be at
the time, date and status display.
To show all programs in memory, press
SHOW (from the time date and status
display.)
The display top line will read
“SHOW:” and the bottom line will
read “PROG *EVENTS #TEST 1AUX”,
indicating that your next choices
are to press the PROG key, or * for
Events, or # for Test, or 1 for
Auxiliaries.
Press the PROG key.
The display reads “SHOW PROGRAM:
1DELETE UNIT# 2SEC *BTTN”, indicat-
ing that you have selected to SHOW
PROGRAMS, and that your next
choices are to press 1 to delete a
program, the UNIT-NUMBER key to
show only unit number programs, the
2 key to see Security programs, or
the * key to see the BUTTON pro-
grams.
Press the SHOW key.
By pressing the SHOW key before
pressing UNIT-NUMBER, 2 for Secu-
rity or * for Buttons, you have
told the Model 1503 that you want
to see ALL programs in memory.
If there are any programs in
memory, the first one will appear
on the display.
Press the SHOW key to see the next
program in memory.
When you reach the end of the
programs, the console will beep
three times and the display will
read “NO MORE PROGRAMS”, then the
display will show the last program
in the list.
Press the SET-UP key to go back to the