Galil DMC-1800 Home Security System User Manual


 
210 • Appendices DMC-1700/1800
In Plug and Play Mode (Windows 95 only), no jumpers are required. The Galil Plug and Play drivers will register
the card with an open address and IRQ for communication.
Accessories and Options
DMC-1710 1- axis ISA bus motion controller
DMC-1720 2- axes ISA bus motion controller
DMC-1730 3- axes ISA bus motion controller
DMC-1740 4- axes ISA bus motion controller
DMC-1750 5- axes ISA bus motion controller
DMC-1760 6- axes ISA bus motion controller
DMC-1770 7- axes ISA bus motion controller
DMC-1780 8- axes ISA bus motion controller
DMC-1810 1- axis PCI bus motion controller
DMC-1820 2- axes PCI bus motion controller
DMC-1830 3- axes PCI bus motion controller
DMC-1840 4- axes PCI bus motion controller
DMC-1850 5- axes PCI bus motion controller
DMC-1860 6- axes PCI bus motion controller
DMC-1870 7- axes PCI bus motion controller
DMC-1880 8- axes PCI bus motion controller
DMC-1718 1- axis ISA bus controller with 64 extended I/O
DMC-1728 2- axes ISA bus controller with 64 extended I/O
DMC-1738 3- axes ISA bus controller with 64 extended I/O
DMC-1748 4- axes ISA bus controller with 64 extended I/O
Cable-100-1M 100-pin high density cable, 1 meter
Cable-100-2M 100-pin high density cable, 2 meter
Cable-100-4M 100-pin high density cable, 4 meter
CB-50-100-1700
50-pin to 100-pin converter board, includes two 50-pin ribbon
cables (for DMC-1750 thru DMC-1780)
CB-50-100-1800 50-pin to 100-pin converter board, includes two 50-pin
ribbon cables (for DMC-1850 thru DMC-1880)
CB-50-80-1700 50-pin to 80-pin converter board, includes two 50-pin
ribbon cables (for DMC-17X8 extended I/O expansion)
16-Bit ADC Increased resolution for analog inputs
ICM-1900 (-HAEN or -LAEN) Interconnect module with either High or Low Amp Enable
ICM-1900-Opto (-HAEN or -LAEN)
Interconnect module with Optoisolated digital outputs (either
High or Low Amp Enable)
AMP-1910 Interconnect module with 1-axis power amplifier
AMP-1920 Interconnect module with 2-axes power amplifier
AMP-1930 Interconnect module with 3-axes power amplifier
AMP-1940 Interconnect module with 4-axes power amplifier