Filter
Top Products
8 • Chapter 2 Getting Started DMC-1700/1800
Figure 2-3 - Outline of the DMC-1810 through DMC-1840
Figure 2-4 - Outline of the DMC-1850 through DMC-1880
1 Flash EEPROM J8
50-pin header connector corresponding to pins 1
through 50 of connector for axes 5-8
2 RAM JP1 Master Reset & UPGRD jumpers
3 Motorola 68331 microprocessor JP3
INCOM & LSCOM jumpers. Used for bypassing opto-
isolation for the limit, home, and abort switches and the
digital inputs IN1 - IN8. See section “Bypassing Opto-
Isolation”, Chap3.
DMC-1850/1880 – 1 thru 4 axis only