Filter
Top Products
Index
IN-11
Cisco ONS 15454 Reference Manual, R8.5.x
78-18106-01
four-fiber BLSRs 12-6
four-node path protection configuration 12-15
four-shelf node (fiber-optic bus) 12-33
GNE in a multivendor OSI network 13-50, 13-52, 13-54
G-Series Ethernet cards with CWDM or DWDM
GBICs
5-40
integrated BLSR-DRI topology 12-21
integrated path protection DRI topology 12-24
IP-over-CLNS tunnel with a GNE endpoint 13-53
manual TARP adjacencies 13-39
nodes on the same subnet with secure mode
enabled
13-21
node with multiple subtending rings 12-29
OSI/IP European network 13-57, 13-59
OSI GNE with an IP connection to the DCN 13-55,
13-56
path-protected mesh networks 12-31
path protection subtending from a BLSR 12-29
path protection to BLSR integrated DRI
handoff
12-26
path protection to BLSR traditional DRI
handoff
12-26
path protection with a fiber break 12-15
protocol flow in an IP-over-CLNS tunnel 13-43
Proxy ARP 13-5
remote node connected to an ENE Ethernet port 13-28
roll from one circuit to another 11-43
SOCKS proxy server implementation 13-14, 13-15
split fiber routing on a CE-Series card VCAT
circuit
11-35
static routes 13-7
TCA raised on electrical ports 15-2
three-node linear ADM 12-31
traditional BLSR-DRI with opposite-side
routing
12-21
traditional BLSR-DRI with same-side routing 12-20
traditional drop-and-continue path protection
DRI
12-23
traffic pattern on a two-fiber BLSR 12-5
two BLSRs shared by one node 12-30
two-fiber BLSR 12-3
two-fiber BLSR fiber connections 12-13
unprotected configuration 7-14
exporting
circuits 11-3, 11-10
CTC data 8-17
extended fiber clips 1-7
external alarms and controls
alarm contact connections 1-69
backplane connection location 1-12
description 2-30, 14-14
wire-wrap and pin connections 1-57
See also AEP
See also AIC-I card
external firewalls 13-25
external switching commands 7-14
external timing 10-1
F
facility data link 15-18
factory defaults. See network element defaults
fan-tray air filter. See air filter
fan-tray assembly
air filter 1-65
description 1-62
Fan Fail LED, causes 1-65
fan failure 1-65
fan speed 1-65
high-density shelf requirements 1-63
power requirements A-8
FC_MR-4 card
applications 6-7
compatible GBICs 6-8
cross-connect compatibility 2-6, 6-4
description 6-1
factory defaults C-32
History window 15-55
illustration 6-3
interoperability with Cisco MDS 9000 6-2