Cisco Systems 15454-FTF2 Home Security System User Manual


 
Tables
xxxv
Cisco ONS 15454 Reference Manual, R8.5.x
78-18106-01
Table 7-2 Supported 1:N Protection by Electrical Card 7-3
Table 7-3 EIA Connectors Per Side 7-5
Table 7-4 Electrical Card Protection By EIA Type 7-6
Table 8-1 JRE Compatibility 8-5
Table 8-2 Computer Requirements for CTC 8-5
Table 8-3 ONS 15454 Connection Methods 8-7
Table 8-4 Node View Card Colors 8-9
Table 8-5 Node View Card Statuses 8-10
Table 8-6 Node View Card Port Colors and Service States 8-10
Table 8-7 Node View Tabs and Subtabs 8-11
Table 8-8 Network View Tabs and Subtabs 8-13
Table 8-9 Node Status Shown in Network View 8-14
Table 8-10 DCC Colors Indicating State in Network View 8-14
Table 8-11 Link Icons 8-15
Table 8-12 Card View Tabs and Subtabs 8-16
Table 8-13 TL1 and Static IP-Over-CLNS Tunnels Comparison 8-20
Table 9-1 ONS 15454 Security Levels—Node View 9-2
Table 9-2 ONS 15454 Security Levels—Network View 9-5
Table 9-3 ONS 15454 Default User Idle Times 9-7
Table 9-4 Audit Trail Window Columns 9-8
Table 9-5 Shared Secret Character Groups 9-10
Table 10-1 SONET SSM Generation 1 Message Set 10-4
Table 10-2 SONET SSM Generation 2 Message Set 10-4
Table 10-3 SDH SSM Messages 10-4
Table 11-1 STS Mapping Using CTC 11-4
Table 11-2 ONS 15454 Circuit Status 11-6
Table 11-3 Circuit Protection Types 11-9
Table 11-4 Port State Color Indicators 11-11
Table 11-5 VT Matrix Port Usage for One VT1.5 Circuit 11-15
Table 11-6 Portless Transmux Mapping for XCVT Drop Ports 11-16
Table 11-7 Portless Transmux Mapping for XCVT Trunk and XC10G/XC-VXC-10G Any-Slot Ports 11-16
Table 11-8 DCC Tunnels 11-17
Table 11-9 ONS 15454 Cards Capable of J1 Path Trace 11-25
Table 11-10 STS Path Signal Label Assignments for Signals 11-26
Table 11-11 STS Path Signal Label Assignments for Signals with Payload Defects 11-26