Filter
Top Products
4-44
Cisco ONS 15454 Reference Manual, R8.5.x
78-18106-01
Chapter 4 Optical Cards
4.18.2 Ports and Line Rates
–
If Port 10 is used as an OC-3, Ports 9, 11, and 12 can be used as an OC-3 or OC-12.
–
Any port can be used as an OC-12 or OC-3, as long as all of the above rules are followed.
Table 4-20 shows the 15454_MRC-12 port availability and line rate for each port, based on total
available bandwidth. To use the table, go to the rows for the bandwidth that you have available, as
determined in Table 4-19. Each row indicates what line rate can be provisioned for each port (identified
in the MCR-12 Port Number row). The Ports Used column shows the total number of ports that can be
used with each bandwidth scheme.
Table 4-20 Line Rate Configurations Per 15454_MRC-12 Port, Based on Available Bandwidth
MRC-12 Port
Number1234 567 89101112
Ports
Used
Total
STSs
Permitted
Rate(s)
OC-3
OC-1
2
OC-4
8
OC-3
OC-1
2
OC-3
OC-1
2
OC-3
OC-12
OC-48
OC-3
OC-1
2
OC-3
OC-1
2
OC-3
OC-12
OC-48
OC-3
OC-1
2
OC-3
OC-1
2
OC-3
OC-12
OC-48
OC-3
OC-1
2
OC-3
OC-1
2
——
STS-12
Available
Bandwidth
12——— —————— ——1 12
3 ——3 ——3 ——3 — —4 12
STS-48
Available
Bandwidth
3333 333 333 331236
3——12333 333 331039
3——12——12—33 33739
3 ——12 ——12 ——12 ——4 39
12333333 333 331245
12 — — 12 3 3 3 3 3 3 3 3 10 48
12——12——12—3 3 3 3 7 48
12 — — 12 — — 12 — — 12 — — 4 48
12 3 3 3 — — 12 — 3 3 3 3 9 45
12 3 3 3 3 3 3 3 — 12 — — 9 45
3333 3333—12——936
3 3 3 3 — — 12 — — 12 — — 6 36
48——— —————— ——1 48
483 3 — 121212 123 3 3 3 11114