Filter
Top Products
A-48
Cisco ONS 15454 Reference Manual, R8.5.x
78-18106-01
Appendix A Hardware Specifications
A.7 Ethernet Card Specifications
–
Connectors: LC duplex connector for the XFPs
–
Compliance: Telcordia GR-253-CORE
• Transmitter
–
Maximum transmitter output power: Depends on SFP (see A.2 SFP, XFP, and GBIC
Specifications, page A-5)
–
Minimum transmitter output power: Depends on SFP (see A.2 SFP, XFP, and GBIC
Specifications, page A-5)
• Receiver
–
Maximum receiver level: Depends on SFP (see A.2 SFP, XFP, and GBIC Specifications,
page A-5)
–
Minimum receiver level: Depends on SFP (see A.2 SFP, XFP, and GBIC Specifications,
page A-5)
–
Receiver input wavelength range: 1260 to 1565 nm
• Environmental
–
Operating temperature: 32 to +131 degrees Fahrenheit (0 to +55 degrees Celsius)
–
Operating humidity: 5 to 95 percent, noncondensing
–
Power consumption: 40.00 W, 0.83 A at –48 V, 136.49 BTU/hr
• Dimensions
–
Height: 12.650 in. (321.3 mm)
–
Width: 0.716 in. (18.2 mm)
–
Depth: 9.000 in. (228.6 mm)
–
Depth with backplane connector: 9.250 in. (235 mm)
–
Weight not including clam shell: 3.1 lb (1.3 kg)
A.7 Ethernet Card Specifications
This section includes specifications for the E100T-12, E100T-G, E1000-2, E1000-2-G, CE-1000-4,
CE-100T-8, CE-MR-10, G1K-4, ML100T-12, ML1000-2, ML-MR-10, and ML100X-8 cards.
For compliance information, refer to the Cisco Optical Transport Products Safety and Compliance
Information document.
A.7.1 E100T-12 Card Specifications
The E100T-12 card has the following specifications:
• Environmental
–
Operating temperature
C-Temp (15454-E100T): 32 to 131 degrees Fahrenheit (0 to +55 degrees Celsius)
–
Operating humidity: 5 to 95 percent, noncondensing
–
Power consumption: 65 W, 1.35 A, 221.93 BTU/hr
• Dimensions