Filter
Top Products
C-38
Cisco ONS 15454 Reference Manual, R8.5.x
78-18106-01
Appendix C Network Element Defaults
C.2.3 Defaults by Card
C.2.3.13 OC3-8 Card Default Settings
Table C-13 lists the eight-port OC3-8 (OC3 IR/STM1 SH 1310-8) card default settings.
Table C-13 OC3-8 Card Default Settings
Default Name Default Value Default Domain
OC3-8.config.line.AINSSoakTime 08:00 (hours:mins) 00:00, 00:15, 00:30 .. 48:00
OC3-8.config.line.AlsMode Disabled Disabled, Auto Restart, Manual Restart,
Manual Restart for Test
OC3-8.config.line.AlsRecoveryPulseDuration 2.0 (seconds) 2.0, 2.1, 2.2 .. 100.0 when AlsMode
Disabled, Auto Restart, Manual Restart;
80.0, 80.1, 80.2 .. 100.0 when AlsMode
Manual Restart for Test
OC3-8.config.line.AlsRecoveryPulseInterval 100 (seconds) 60 - 300
OC3-8.config.line.PJStsMon# 0 (STS #) 0 - 3
OC3-8.config.line.SDBER 1.00E-07 1E-5, 1E-6, 1E-7, 1E-8, 1E-9
OC3-8.config.line.sdh.AdminSSMIn STU G811, STU, G812T, G812L, SETS, DUS
OC3-8.config.line.sdh.Send<FF>DoNotUse FALSE FALSE when SendDoNotUse TRUE;
FALSE, TRUE when SendDoNotUse FALSE
OC3-8.config.line.sdh.SendDoNotUse FALSE FALSE, TRUE
OC3-8.config.line.sdh.SyncMsgIn TRUE FALSE, TRUE
OC3-8.config.line.SendAISOnFacilityLoopback TRUE TRUE, FALSE
OC3-8.config.line.SendAISOnTerminalLoopback FALSE FALSE
OC3-8.config.line.SFBER 1.00E-04 1E-3, 1E-4, 1E-5
OC3-8.config.line.sonet.AdminSSMIn STU PRS, STU, ST2, ST3, SMC, ST4, DUS, RES
when
//.//.//.//.NODE.timing.general.SSMMessage
Set Generation 1; PRS, STU, ST2, TNC,
ST3E, ST3, SMC, ST4, DUS, RES when
//.//.//.//.NODE.timing.general.SSMMessage
Set Generation 2; PRS, STU, ST2, ST3,
SMC, ST4, DUS, RES when
//.//.//.//.NODE.timing.general.SSMMessage
Set N/A
OC3-8.config.line.sonet.Send<FF>DoNotUse FALSE FALSE when SendDoNotUse TRUE;
FALSE, TRUE when SendDoNotUse FALSE
OC3-8.config.line.sonet.SendDoNotUse FALSE FALSE, TRUE
OC3-8.config.line.sonet.SyncMsgIn TRUE FALSE, TRUE
OC3-8.config.line.State IS,AINS IS, OOS,DSBLD, OOS,MT, IS,AINS
OC3-8.config.sts.IPPMEnabled FALSE TRUE, FALSE
OC3-8.physicalthresholds.alarm.LBC-HIGH 200 (%) LBC-LOW, LBC-LOW + 1, LBC-LOW + 2 ..
255
OC3-8.physicalthresholds.alarm.LBC-LOW 20 (%) 0, 1, 2 .. LBC-HIGH