Cisco Systems 15454-FTF2 Home Security System User Manual


 
A-1
Cisco ONS 15454 Reference Manual, R8.5.x
78-18106-01
APPENDIX
A
Hardware Specifications
Note The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms
do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration.
Rather, these terms, as well as "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's
path protection feature, which may be used in any topological network configuration. Cisco does not
recommend using its path protection feature in any particular topological network configuration.
This appendix contains hardware and software specifications for the ONS 15454.
The following sections are included:
A.1 Shelf Specifications, page A-1
A.2 SFP, XFP, and GBIC Specifications, page A-5
A.3 General Card Specifications, page A-7
A.4 Common Control Card Specifications, page A-12
A.5 Electrical Card Specifications, page A-17
A.6 Optical Card Specifications, page A-27
A.7 Ethernet Card Specifications, page A-48
A.8 Storage Access Networking Card Specifications, page A-53
A.1 Shelf Specifications
This section provides specifications for shelf bandwidth; a list of topologies; Cisco Transport Controller
(CTC) specifications; LAN, TL1, modem, alarm, and electrical interface assembly (EIA) interface
specifications; timing, power, and environmental specifications; and shelf dimensions.
A.1.1 Bandwidth
The ONS 15454 has the following bandwidth specifications:
Total bandwidth: 240 Gbps
Data plane bandwidth: 160 Gbps
SONET plane bandwidth: 80 Gbps