Filter
Top Products
Instruction 24-94484-24
Operation
6. After the Found New Hardware Wizard has finished installing the
software, click Finish to close the Wizard.
4.14.3 Recovering Data
Before data can be recovered from the analyzer, install the PCA 2 Data
Recovery Program, USB cable, and USB device driver as described in Sec-
tions 4.14.1 and 4.14.2.
Recover either the logging or combustion data as follows:
1. Start the program by either double-clicking the PCA2 icon
on the Windows desktop, or clicking the PCA2 shortcut in
start menu. The “Bacharach PCA 2 Data Recovery Program”
window should appear.
Observe that the window is divided into two sections. The left-hand
section is used to recover logging data, while combustion data is recov-
ered from the right-hand section.
In the following steps, the logging data will be recovered. The same
procedure can be used to recover combustion data using the right-hand
section of the window.
2. Select where the downloaded file containing the recovered data will be
located and give it a filename by clicking the Open Log File button. The
following example screens show that the downloaded file will be placed
into a pre-existing PCA2 Logging Data folder and given the filename
Customer XYZ.