Filter
Top Products
Instruction 24-9448 1-9
Introduction
1.6 Front Panel Buttons
Descriptions of the front panel buttons are given below. Note that a control
may perform multiple functions as determined by what screen is being
displayed at the time.
The functions of these buttons are defined by labels ap-
pearing above them on the LCD. The labels that appear
depend on the functions that can be performed in the
particular screen being displayed.
PRINT (F1): Transmits the data displayed on the screen
to a printer through the IrDA communications port.
MENU (F2): Displays the Main Menu.
SAVE (F3): Saves the data currently displayed on the
LCD in memory. Up to 500 individual Combustion Test
and Pressure records can be saved. After which, the old-
est data will be overwritten.
ZERO (F2): When viewing the Pressure screen, this
button zeros the pressure sensor to current atmospheric
conditions.
PAGE– (F1): When viewing the Memory or Logging
Directory, each press of this button pages down through
the directory. Holding this button down speeds up the
paging process.
PAGE+ (F3): When viewing the Memory or Logging
Directory, each press of this button pages up through
the directory. Holding this button down speeds up the
paging process.
The arrow buttons move the cursor on the LCD in the di-
rection of the arrow. In screens that require the entry of
alphanumerical data, use the buttons to move cursor
across the screen and then use the buttons to incre-
ment and decrement the data. When viewing a menu, use
the buttons to quickly move to the top and bottom of
the menu.