Filter
Top Products
Instruction 24-9448 4-13
Operation
4.12.2 Setting the Logging Interval and Duration
The logging interval is the length of time between measurements, while
the logging duration is the time allocated to the logging process. Set the
logging interval and duration as follows:
TIP: If the duration is set for more than 10 hours, we recom-
mend using the optional AC power adapter to power the
analyzer.
1. As soon as logging is turned ON as described
in Section 4.12.1, the LOGGING INTERVAL
screen appears.
2. Use the buttons to highlight the desired
interval, and then press ENT to make the
selection and display the LOGGING DURA-
TION screen. In this example, 1 minute has
been selected
3. Use the buttons to highlight the desired
duration, and then press ENT to make the
selection and display the LOGGING SUM-
MARY screen. In this example, 2 hours has
been selected.
NOTE: If the selected duration requires more
memory than is currently available, then the
analyzer will automatically select the longest
duration possible for the selected interval.
LOGGING INTERVAL
1 sec
5 sec
10 sec
15 sec
30 sec
1 min
2 min
(more)
MENU
F1 F2 F3
LOGGING DURATION
5 min
10 min
15 min
30 min
1 hr
2 hr
5 hr
(more)
MENU
F1 F2 F3