Filter
Top Products
Instruction 24-9448 3-11
Initial Setup
3.12 Print Pressure Selection
Select whether to print or not print the pressure
measurement on the combustion test printout as
follows (see Figure 4-3 on Page 4-31):
1. Display the MAIN MENU by pressing the
MENU (F2) button. If necessary, press ESC
until MENU appears above F2.
2. Use the buttons to highlight SETUP,
and then press ENT to display the SETUP
MENU.
3. Use the buttons to highlight PRINT
PRESSURE, and then press ENT to display
the PRINT PRESSURE screen.
4. Use the buttons to highlight either No (do
not print pressure) or Yes (print pressure). In
the example shown, Yes has been selected.
5. Press ENT to save the selection and re-display
the SETUP MENU.
MAIN MENU
FUEL
PRESSURE
MEMORY
SETUP
CALIBRATION
DIAGNOSTICS
STATUS
F1 F2 F3
MENU
SETUP MENU
(more)
TIME
O2 REF
PRINT PRESSURE
DIAGNOSTICS
BATTERY CHARGER
LOGGING
BUTTON SOUND
MENU
F1 F2 F3
PRINT PRESSURE
No
Yes
05/26/06 09:25:30 AM
MENU
F1 F2 F3