Filter
Top Products
Instruction 24-9448 4-3
Operation
4.3 Selecting a Fuel
The top line of the Combustion Test HOLD screen
shows the fuel currently selected. In the example
shown, the current fuel is NATURAL GAS. If
necessary, change the fuel as follows:
1. Display the MAIN MENU by pressing the
MENU (F2) button.
2. Use the buttons to highlight FUEL, and
then press ENT to display the FUEL MENU.
3. Use the buttons to scroll through the
list of available fuels until the desired
fuel is highlighted. In the example shown,
PROPANE has been selected.
TIP: Use the buttons to quickly scroll to the
bottom and top of the list.
4. Press ENT to save the selection and return
to the Combustion Test HOLD screen. The
newly selected fuel should now appear in the
top line of the display.
HOLD NATURAL GAS
O2 20.9 %
CO 0 ppm
EFF --- %
CO2 --- %
T-STK 71.5 °F
T-AIR 71.5 °F
EA --- %
CO(0) --- ppm
PRINT MENU SAVE
F1 F2 F3
MAIN MENU
FUEL
PRESSURE
MEMORY
SETUP
CALIBRATION
DIAGNOSTICS
STATUS
F1 F2 F3
MENU
FUEL MENU
NATURAL GAS
OIL #2
OIL #4
OIL #6
PROPANE
COAL
WOOD
(more)
MENU
F1 F2 F3
HOLD PROPANE
O2 20.9 %
CO 0 ppm
EFF --- %
CO2 --- %
T-STK 71.5 °F
T-AIR 71.5 °F
EA --- %
CO(0) --- ppm
PRINT MENU SAVE
F1 F2 F3