Filter
Top Products
Instruction 24-94483-14
Initial Setup
3.15 Logging Selection
When the logging function is activated, up to 500
combustion test records will be automatically
stored in memory at a preset interval over a pre-
determined length of time.
Refer to Section 4.12 for detailed information on
how to select the logging function; how to set the
interval and duration time periods; and how to
view or download the stored data.
3.16 Button Sound
The audible sound used to signal when a button is
pressed can be turned OFF and ON as follows:
1. Display the MAIN MENU by pressing the
MENU (F2) button. If necessary, press ESC
until MENU appears above F2.
2. Use the buttons to highlight SETUP,
and then press ENT to display the SETUP
MENU.
3. Use the buttons to highlight BUTTON
SOUND, and then press ENT to display the
BUTTON SOUND screen.
4. Use the buttons to highlight either OFF
(turn sound OFF) or ON (turn sound ON). In
the example shown, OFF has been selected.
5. Press ENT to save the selection and
re-display the SETUP MENU.
SETUP MENU
(more)
TIME
O2 REF
PRINT PRESSURE
ZOOM
BATTERY CHARGER
LOGGING
BUTTON SOUND
MENU
F1 F2 F3
–
MAIN MENU
FUEL
PRESSURE
MEMORY
SETUP
CALIBRATION
DIAGNOSTICS
STATUS
F1 F2 F3
MENU
SETUP MENU
(more)
TIME
O2 REF
PRINT PRESSURE
ZOOM
BATTERY CHARGER
LOGGING
BUTTON SOUND
MENU
F1 F2 F3
BUTTON SOUND
OFF
ON
05/26/06 09:25:30 AM
MENU
F1 F2 F3