Filter
Top Products
Instruction 24-94488-2
Parts & Service
Item
(Fig. 8-1) Description Part No.
18 Sensors (NOT-calibrated):
18A O
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-0788
O
2
sensor PCB only * . . . . . . . . . . . . . . . . . . . . . . . . . . .24-1364
18B CO-H
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-0789
18C CO
HI
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-0997
18D NO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-0881
Bias battery for NO sensor ** . . . . . . . . . . . . . . . . . . .204-0020
18E NO
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-1027
18F SO
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-0998
19 Screw, #4 x 1/2 LG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .02-2144
20 Battery Clip, Single
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .04-1434
21 Battery Clip, Double . . . . . . . . . . . . . . . . . . . . . . . . . . . .04-1433
22 Cable Assembly
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-1410
23 Tubing, Vinyl, 1/8 ID x 3/16 OD *** . . . . . . . . . . . . . . . .03-6104
24 Tubing, Silicon, 1/16 ID x 1/8 OD *** . . . . . . . . . . . . . . .03-6372
25 Tubing, Silicon, 3/32 ID x 5/32 OD *** . . . . . . . . . . . . .103-6101
26 Tubing, Silicon, 1/8 ID x 3/16 OD *** . . . . . . . . . . . . . .103-6102
* A replacement O2 PCB is only required if it is damaged.
** When replacing the NO sensor it is good practice to replace the bias
battery at the same time. Also, see Section 6.4 for required baseline
stability period required when the NO sensor is replaced and bias
battery is installed.
*** Order tubing by the foot