Filter
Top Products
Instruction 24-9448 2-3
Specications
Power Requirements:
Four disposable ‘AA’ alkaline batteries provide at least 15 hours of continu-
ous operation. NiMH rechargeable batteries can also be used, with the
operating time dependent on battery type and condition.
An optional AC power adapter, which runs from any convenient source of
100–240 VAC, 50/60 Hz power, can be used to power the analyzer on a con-
tinuous basis. If using rechargeable batteries, the AC power adapter can also
be used to charge the batteries while inside the analyzer.
Warm-Up Time:
60 seconds. Sensors are checked and auto zeroed during warm-up.
Memory:
• 500 complete combustion test records
• 500 complete logged combustion test records
Interfaces:
• Printer – Infrared (IrDA) communications
• Computer – USB
Dimensions:
9H x 3W x 2.5D inches (22.9 x 7.6 x 6.3 cm)
Weight:
• Analyzer – 1.4 lb (0.6 kg) w/ batteries
• Probe & Hose Assembly – 1 lb (0.5 kg)