Filter
Top Products
Instruction 24-9448 3-5
Initial Setup
3.6 Temperature Units Selection
Select to display temperature in either °F or °C
as follows:
1. Display the MAIN MENU by pressing the
MENU (F2) button. If necessary, press ESC
until MENU appears above F2.
2. Use the buttons to highlight SETUP,
and then press ENT to display the SETUP
MENU.
3. Use the buttons to highlight TEMP
UNITS, and then press ENT to display the
TEMP UNITS MENU.
4. Use the buttons to highlight the desired
temperature units. In the example shown,
Fahrenheit has been selected.
5. Press ENT to save the selection and re-display
the SETUP MENU.
MAIN MENU
FUEL
PRESSURE
MEMORY
SETUP
CALIBRATION
DIAGNOSTICS
STATUS
F1 F2 F3
MENU
SETUP MENU
TEMP UNITS
PRESSURE UNITS
POLLUTION UNITS
DATE
TIME
O2 REF
PRINT PRESSURE
(more)
MENU
F1 F2 F3
TEMP UNITS MENU
Celsius
Fahrenheit
MENU
F1 F2 F3
05/26/06 09:25:30 AM