Filter
Top Products
Instruction 24-94484-16
Operation
4.13.1 Recalling Combustion Test Data
Recall individual combustion test data records as follows:
1. Display the MAIN MENU by pressing the
MENU (F2) button. If necessary, press ESC
until MENU appears above F2.
2. Use the buttons to highlight MEMORY,
and then press ENT to display the MEMORY
MENU.
3. Use the buttons to highlight MEMORY
DIRECTORY, and then press ENT to display
the MEMORY DIRECTORY screen.
4. Use the buttons to highlight the desired
memory location to be recalled. Each memory
location is identified by the date and time
at which data was saved. The word EMPTY
signifies that the memory location does not
contain data.
5. Press ENT to display the data contained in
the selected memory location.
Note the following:
• The top line of the recalled combustion test
data screen shows the memory location being
viewed. In this example, “MEM: 1” is being
displayed
• The ENT button can be pressed to view other
memory test data screens.
• The recalled combustion test data can be
printed by pressing the PRINT (F1) button
(refer to Section 4.16).
MAIN MENU
FUEL
PRESSURE
MEMORY
SETUP
CALIBRATION
DIAGNOSTICS
STATUS
F1 F2 F3
MENU
MEMORY MENU
MEMORY DIRECTORY
LOGGING DIRECTORY
CLEAR MEMORY DATA
CLEAR LOGGING DATA
CLEAR ALL MEMORY
F1 F2 F3
MENU
MEMORY DIRECTORY
1 05/23/06 10:00:00
2 05/23/06 10:30:14
3 05/23/06 11:45:38
4 05/23/06 01:50:10
5 05/23/06 03:35:25
6 EMPTY
7 EMPTY
(more)
F1 F2 F3
PAGE- MENU PAGE+
Mem: 1 NATURAL GAS
O2 4.0 %
CO 12 ppm
EFF 82.6 %
CO2 9.5 %
T-STK 374 °F
T-AIR 68.0 °F
EA 21.3 %
CO(3) 13 ppm
PRINT MENU
F1 F2 F3