Filter
Top Products
Instruction 24-9448 4-17
Operation
4.13.2 Recalling Logged Test Data
Recall individual logged combustion test data records as follows:
1. Display the MAIN MENU by pressing the
MENU (F2) button. If necessary, press ESC
until MENU appears above F2.
2. Use the buttons to highlight MEMORY,
and then press ENT to display the MEMORY
MENU.
3. Use the buttons to highlight LOGGING
DIRECTORY, and then press ENT to display
the LOGGING DIRECTORY screen.
4. Use the buttons to highlight the desired
data logging location to be recalled. Each
logging location is identified by the date and
time at which the data was saved. The word
EMPTY signifies that the logging location
does not contain data.
5. Press ENT to display the logging data con-
tained in the selected memory location.
Note the following:
• The top line of the log test data screen shows
the log location being viewed. In this exam-
ple, “Log: 6” is being displayed.
• The ENT button can be pressed to view other
log test data screens.
• The recalled logged test data can be printed
by pressing the PRINT (F1) button (refer to
Section 4.16).
MAIN MENU
FUEL
PRESSURE
MEMORY
SETUP
CALIBRATION
DIAGNOSTICS
STATUS
F1 F2 F3
MENU
MEMORY MENU
MEMORY DIRECTORY
LOGGING DIRECTORY
CLEAR MEMORY DATA
CLEAR LOGGING DATA
CLEAR ALL MEMORY
F1 F2 F3
MENU
LOGGING DIRECTORY
1 05/23/06 10:00:00
2 05/23/06 10:30:00
3 05/23/06 11:00:00
4 05/23/06 11:30:00
5 05/23/06 12:00:00
6 05/23/06 12:30:00
7 05/23/06 01:00:00
(more)
F1 F2 F3
PAGE- MENU PAGE+
Log: 6 NATURAL GAS
O2 4.0 %
CO 12 ppm
EFF 82.6 %
CO2 9.5 %
T-STK 374 °F
T-AIR 68.0 °F
EA 21.3 %
CO(3) 13 ppm
PRINT MENU
F1 F2 F3