Filter
Top Products
Application of Half-Rounds
under Soffit
The amount of trimming required of a Half-Rounds panel
determines the accessory piece required to receive it. See the
descriptions below.
94
Wolverine Fit and Finish Installation Guide
MADE IN USA
removal of nail flange up to the locking lug:
requires drilling new center hole, and punching a
slot on both ends (16" from center); this allows
for expansion
removal of 1-1/8" or more of nail flange: use
cornice receiver or deluxe F-channel and cornice
molding – drill a new center hole and punch a
slot on both ends (16" from center)
removal of 1-1/2" or more: use either J-channel
or cornice receiver and cornice molding – drill a
new center hole, and punch a slot on both ends
(16" from center)
removal of 3" or more: use standard 3/4" pocket
J-channel, or cornice receiver and cornice
molding combinations – drill a new center hole,
and punch a slot on both ends (16" from center)