Filter
Top Products
Federal Corners
To create a federal-style corner, flash the corner with
aluminum trim coil or other flashing materials. Hang a new
construction starter strip. Position the top nail in the top of the
nailing slot. All other nails should be centered in the slots
spaced 8" to 10" apart.
Position and secure the 3-1/2" lineal.
Position and secure an aluminum starter strip.
Position and secure the 5" lineal.
NOTE: Aluminum starter can be used for both lineals. If
the aluminum starter used for the 5" lineal is not long
enough, fashion a starter using a metal brake and coil
stock to a length that allows for proper nailing into the
substrate.
32
Wolverine Fit and Finish Installation Guide
“L” shaped
flashing