Filter
Top Products
Miscellaneous Accessories
Crown Molding
Used in conjunction with 5" lineals to create a custom
molded window or door header. Can also be used with 3-1/2"
lineals and 3/4" pocket J-channels. Crown has a 2-1/4" top
exposed edge.
Crown Molding Cap
Caps the ends of a crown molding with minimal cutting.
NOTE: Shown already cut in half
–
one piece makes a left
and right-end cap.
Soffit Cove Trim
(Shown as if secured to trusses or soffit nailers.)
A decorative soffit receiver featuring a 9/16" receiving pocket.
(Shown as if attached to wall substrate. This profile can also be used as an
inside cornerpost. Will not work for all profiles.)
Aluminum Trim Coil
24"-wide PVC-coated aluminum.
11
Wolverine Fit and Finish Installation Guide