Filter
Top Products
Special Tools
Nail Slot Punch
Punches elongated holes to allow nailing the cut edge
of a panel. Also used to enlarge an existing hole to allow
proper nailing.
Snap Lock Punch
Punches tabs in the cut edge of a panel used as a finishing
course at the top of a wall or underneath a window. The tabs
lock into undersill trim. For best results, we recommend using
an SL5 punch, which is designed specifically for vinyl
applications. You may also use a redesigned and improved
version of the SL5 punch. To be certain you’re using the right
model SL5, make sure it was manufactured after November
1987.
Zip Tool
Locks and unlocks panels.
Shingle Repair Kit
Use one kit to repair one Half-Rounds panel.
16
Wolverine Fit and Finish Installation Guide
Cut off and
discard
cam clip
pop rivet
washer