Filter
Top Products
58 SS-SVX09A-EN
Installation
Refer to Wiring Notes on Page p. 55
EVP Chiller Control
Each unit ordered for EVP Chiller applications (digit 9 in the model number), is shipped with the
following controls:
EVP Remote Panel w/ W7100G Controller
Freezestat (6S12)
Chiller Water Temperature Sensor (6RT2)
Freezestat Bulb well
Chilled Water Temperature Sensor Well
The installation of the freezestat bulb well, freezestat bulb, and the chilled water temperature
sensor was discussed in the “Chilled Water Piping” section. Refer to that section for their
installation locations and dimensional data.
The chiller control (located in the remote panel) controls the system operation by responding to
the leaving water temperature. The remote panel must be mounted indoors and within 20 feet of
the chiller.
Figure 28 illustrates the remote panel dimensional data, the component locations, the locations for
the shipwith items, grounding lugs, and the field connection terminal board 6TB9. Refer to the field
Figure 27. Field Connection Diagram for RAUC-C20 - 60 “Variable Air Volume” Application