Filter
Top Products
97663032 A
Page 93
MEDIA LOADING
Individual media cartridges can be selected for loading by host command or by the autoload configuration
option. The host can select and load a media cartridge from any shuttle slot by issuing an appropriate
SCSI bus command.
Selection by the autoload configuration option occurs at initial power up and when the LOAD/MENU switch
on the DOC is pressed while the LF 8600 is in Operating mode. Depending on the setting of the autoload
option, the LF 8600 automatically inserts and loads one specified media cartridge or the most recently
used (MRU) cartridge or moves the shuttle to the home position.
If the selected cartridge is not present, the DOC displays "# Empty", where # represents cartridges 1-6.
For more information on viewing and setting drive configuration options, refer to the Configuration Mode
section of this manual.