Filter
Top Products
97663032 A
Page 63
A structure diagram for the View Configuration menu is shown in the next figure.
To move up a level in the Configuration menu hierarchy to the Main menu, press the LOAD/MENU and
TEST/SELECT switches simultaneously.
To exit the Configuration mode, press the LOAD/MENU and TEST/SELECT switches simultaneously. The
display will show the message which appeared prior to the drive entering the Configuration mode.
Figure 35. View Config Menu
SETTING THE CONFIGURATION OF THE OPERATING PARAMETERS ("SET CONFIG")
To enter the mode to set the drive configuration, press the TEST/SELECT switch while "Set Config" is
displayed in the Main menu. The drive will enter the Set Configuration menu which includes the following
options:
"Set Defaults" Press the SELECT switch to set all drive operating parameters to the factory defaults.
Press the MENU switch to select the next option in the Set Configuration menu.
SELECT
MENU
View Current
MENU
View FW Revs
SELECT
MENU
View HW S/Ns
SELECT
MENU
View HW P/Ns
SELECT
DISPLAY CURRENT
SELECTIONS
DISPLAY FW
REVISIONS
DISPLAY HW
SERIAL NUMBERS
DISPLAY HW
PART NUMBERS
PRESS BOTH SWITCHES
SIMULTANEOUSLY FROM
ANY MENU TO RETURN TO
VIEW CONFIG
VIEW CONFIG MENU
PRESS BOTH SWITCHES
SIMULTANEOUSLY FROM
VIEW CONFIG TO RETURN
TO THE MAIN MENU
MAIN MENU