Filter
Top Products
97663032 A
Page 19
TILT RANGE
The LF 8600 is not designed for use when tilted from the vertical position.
HEAT DISSIPATION
The drive will typically present a heat load of 95 kg-calories/hr (376 BTU/hr) during a read/write operation.
When media cartridges are inserted, loaded, spun up, spun down, unloaded and removed at the drive's
maximum rate, the LF 8600 will typically present a heat load of 138 kg-calories/hr (546 BTU/hr).
PARTICULATE LIMITS
The LF 8600 is designed for use in an office or computer room. The environment must have a low dust
level. The LF 8600 filters incoming air for cooling to reduce the quantity of particles entering the drive;
however, the filter is not effective against small particles (including tobacco smoke) which will become
deposited on optical components and media, causing degradation in drive performance. Refer to the
Operator Maintenance section for media cleaning and air filter cleaning instructions.
WARNING LABELS
The LF 8600 is classified as a laser product and meets all United States federal requirements. The warning
labels shown in the figure below have been applied to the Drive to ensure compliance with federal
regulations and must not be removed from the LF 8600.
Figure 4. Location of LF 8600 Warning Labels
LASER CLASS
LABEL
CANADIAN
CLASS A LABEL
FCC, RFI,
CLASS A LABEL
LASER DANGER
LABEL