Filter
Top Products
PLASMON L M S - LF 8600 USER MANUAL
Page 64
"SCSI ID" Press the SELECT switch to scroll through the possible SCSI ID values (0 through
15). When the desired ID value is displayed, press the MENU switch to enter that
value as the SCSI ID and select the next option in the Set Configuration menu.
"Parity" Press the SELECT switch to turn parity checking on or off. SCSI bus parity generation
is always enabled but SCSI bus parity checking by the drive may be turned on or off.
When the desired state (on or off) is displayed, press the MENU switch to enter that
state for parity checking and select the next option in the Set Configuration menu.
"Language" Press the SELECT switch to scroll through the language options (Eng = English, Frh =
French, Grm = German) for the DOC operating messages. When the desired
language option is displayed, press the MENU switch to enter that option and select
the next option in the Set Configuration menu.
"Wrt Prot" Press the SELECT switch to turn write protect on or off. When the desired state (on or
off) is displayed, press the MENU switch to enter that state for write protect and select
the next option in the Set Configuration menu.
"AutoLoad"
Press the SELECT switch to scroll through the Auto Load options. The drive
can be configured to load the cartridge residing in a specific slot 0 - 6 or the
Most Recently Used (MRU) cartridge. When the desired option is displayed,
press the MENU switch to enable that option and select the next option in the
Set Configuration menu.
"Load SW" Press the SELECT switch to enable or disable the LOAD switch on the DOC. When
the desired state (on or off) is displayed, press the MENU switch to enter that state for
load switch and select the next option in the Set Configuration menu.
"Rd Ahead" Press the SELECT switch to turn read ahead on or off. When the desired state (on or
off) is displayed, press the MENU switch to enter that state for read ahead and select
the next option in the Set Configuration menu.
"CDE Curs" Press the SELECT switch to turn the CDE indicator (a blinking solid cursor in the
rightmost display position) on or off. When the desired state (on or off) is displayed,
press the MENU switch to enter that state for CDE Curs and select the next option in
the Set Configuration Menu.
"Busy" Press the SELECT switch to toggle the Busy option between On and Off. When the
desired mode has been selected, press the LOAD/MENU switch to select the next
option.
"ModSelRA" Press the SELECT switch to toggle the Mode Select Read Ahead option between On
and Off. When the desired mode has been selected, press the LOAD/MENU switch to
select the next option.
"MMSpinUp" Press the SELECT switch to toggle the Media Management Spin Up option between
On and Off. When the desired mode has been selected, press the LOAD/MENU
switch to select the next option.
"Negotiation" Press SELECT switch to toggle between TargSDTR OFF or ON. Press MENU to
switch to TargSWTR. Press SELECT again to toggle between TargSWTR OFF and
ON. When the desired selctions have been made, press MENU and SELECT
simultaneously to return tothe NEGOTIATIONS menu.