Filter
Top Products
97663032 A
Page 29
REPACKING THE RACK MOUNT CONFIGURATION
1. Open the media access door and manually move the shuttle all the way to the left.and insert
the foam shipping block to hold it in place. Close the media access door.
2. Remove the LF 8600 chassis with its bezel from the Rack Mount configuration by reversing
the procedure detailed in the Installation and De-installation section. The bezel extends
below the chassis; ensure that you do not place the unit flat on a hard surface, thereby
damaging the bezel.
3. Ensure that the lower packing material is positioned to form a rectangular frame for the
LF 8600 chassis which opens to the front.
4. Place the bezel relief cushion on the pallet so that it will support the chassis just behind the
bezel.
Figure 10. Moving the Shuttle Assembly to the Shipping Position
5. Place the LF 8600 into the foam frame so that the drive rests on the bezel relief cushion and
the bezel bears no weight.
6. Place the lower front foam cushion between the carton and the front of the LF 8600. Place the
ESD protective packing material on top of the drive.