Filter
Top Products
PLASMON L M S - LF 8600 USER MANUAL
Page 44
9. Install one of the lateral support angles to anchor the chassis to the adjacent cabinet rail. The
angle is mounted on the chassis with two M4 screws and attaches to the rail with cabinet-
specific screws (not supplied).
Figure 22. Installing the Lateral Support Angle
10. Install the cabinet trim panel by pressing its ball studs into the keeper holes on the platform
support rack.
MOUNTING SCREWS
RIGHT
SUPPORT
ANGLE
LEFT
SUPPORT
ANGLE
THE RACK MOUNT KIT
CONTAINS BOTH LEFT AND
RIGHT SUPPORT ANGLES.
YOU NEED TO INSTALL ONLY
ONE SUPPORT ANGLE.