Filter
Top Products
PLASMON L M S - LF 8600 USER MANUAL
Page 16
TEMPERATURE, HUMIDITY AND ALTITUDE
The following table lists the LF 8600 operating, storage and transit limits for temperature, humidity and
altitude.
Table 2. Temperature, Humidity and Altitude Limits
1 Storage specifications are for 90 days maximum in Plasmon LMS packaging. No condensation is permitted. Transit specifi-
cations are based on a maximum 1-week period in a factory-sealed container.
2 Maximum operating temperature is 42 _C for a free-standing drive at sea level unless otherwise stated. Maximum operating
temperature is derated linearly above 300 m altitude to 38 _C at 2,000 m altitude.
3 See theLD 8100/LF 8120/LF 8600/LF 8602 Product Specification (P/N 97663035) for more information concerning the tem-
perature and humidity operating range.
CONDITION OPERATING NONOPERATING
STORAGE/TRANSIT
1
Temperature
10° to 42° C
2
(50° to 108° F)
-40° to 66° C
-40° to 151° F)
-40° to 66° C
-40° to 151° F)
Maximum Rate of
Change
11° C/hr (20° F/hr) 20° C/hr (36° F/hr) 20° C/hr (36° F/hr)
Humidity
(Noncondensing
10 to 90% 5 to 95% 5 to 95%
Maximum Rate of
Change
10%/hr 10%/hr 10%/hr
Maximum Wet Bulb
Temperature
3
28° C (82° F) 46° C (115° F) 46° C (115° F)
Minimum Dew Point
2°
C (35.6° F) 2°
C (35.6° F) 2°
C (35.6° F)
Altitude
-300 to 3,000 m
(-984 to 9,840 ft)
-300 to 3,000 m
(-984 to 9840 ft)
Storage:
-300 to 3,000 m
(-984 to 9,840 ft)
Transit:
-300 to 12,000 m
(-984 to 40,000 ft)