Filter
Top Products
97663032 A
Page 21
UNPACKING AND REPACKING
INSTRUCTIONS
The LF 8600 is shipped with foam packing material which protects the unit from shock and vibration. When
you receive your LF 8600, inspect the shipping carton for damage before unpacking the unit to
substantiate a claim with the carrier if the unit is damaged. Retain all original packing materials for
possible reshipment.
WARNING
The LF 8600 must be unpacked, repacked and transported by two
persons. Physical injury can result if one person attempts to lift the
LF 8600. A wheeled cartis recommended for transporting the
LF 8600 within a building. Precautions should be taken to guard
against sudden bumps and jarring.
UNPACKING THE TOWER CONFIGURATION
The LF 8600 is packaged as illustrated in the next figure. The top, bottom and sides of the LF 8600 are
protected from shock and vibration by foam cushions. The top cushions are also used to hold the
accessories box (inner box) which is placed between the blocks of foam.
To unpack the unit:
1. Move the carton to the installation site. Unpacking the carton at the installation site minimizes
the effects of vibration and shock.
2. Cut the tape and straps that secure the top of the box. Do not allow the cutting blade to
penetrate into the carton.
3. Carefully lift the outer corrugated carton up and remove it while supporting the inner hinged
wooden ramp. When the carton is removed, lower the ramp to the floor and remove the front
foam cushion.
4. Remove the accessories box (inner carton) containing cables and documentation and the two
foam cushions which support the box. Remove the ESD protective packing material.