Filter
Top Products
97663032 A
Page 45
Figure 23. Installing the Cabinet Trim Panel
11. If only one LF 8600 is to be installed on the platform support rack, an optional blank panel kit
can be ordered to fill the empty space in the trim panel. Install the blank panel by pressing its
ball studs horizontally into the trim panel keeper holes. Retain it with the two M4 screws
provided in the installation kit.
Figure 24. Blank Panel Installation
12. Connect the AC power cord and the host interface SCSI cables and signal terminators.
TRIM
PANEL
BALL STUDS
KEEPER HOLES
BALL STUDS
TRIM PANEL
BLANK PANEL
KEEPER
HOLES
BALL
STUDS