Filter
Top Products
85
System Controller-Related Problems
WV-CU950 controller fails to
start. LCD shows: "Connecting
to Main CPU…"
Symptom
Possible cause / Possible solution
Reference
Admin Console
User's Guide
Check the network connection between the CPU and CU950
controller. Check the controller database and make sure it
has the correct controller Ethernet address.
Encoder and Decoder-Related problems (NTSC model only)
The encoder or decoder does
not start up normally.
Symptom
Possible cause / Possible solution
Reference
Operating
Instructions of
MPEG2
Encoder/MPEG2
Decoder
Check whether the rotary switch setting matches the
encoder or decoder database setting.
Be sure that encoder or decoder is in the main CPU mode.
The digital disk recorder has an
communication error.
Operating
Instructions of
Digital Disk
Recorder
Check the connection between the digital disk recorder and
CPU.
Check if the IP address setting in the admin console match-
es that in SETUP MENU of digital disk recorder.
You cannot select the digital
disk recorder.
Admin Console
User's Guide
Check the settings related to the digital disk recorder in the
admin console.