Filter
Top Products
60
■
Defroster Control
The following procedure is available when a selected cam-
era (housing) is equipped with a defroster.
1. Select the desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. Pressing the DEF ON/OFF button.
The defroster will be activated.
3. To deactivate the defroster, press the DEF ON/OFF
button while holding down the SHIFT button.
Note: The defroster will be automatically deactivated
when the temperature reaches the specified
degrees.
■
Auxiliary Control
You can control one or two auxiliary control devices. The
following procedure is available when an auxiliary control
device, such as Receiver WV-RC150, is connected to a
system unit.
●
Operating Procedure
1. Select the desired monitor and camera. (Refer to p. 56
Monitor Selection and Camera Selection.)
2. Press the AUX 1 ON/OFF or AUX 2 ON/OFF button.
The auxiliary control device, associated by the installa-
tion wiring, will be activated.
3. To quit the auxiliary control, press the AUX 1 ON/OFF
or AUX 2 ON/OFF button while holding down the SHIFT
button.
MON Aux1 On CAM
0123 Unit:01 00512
MON Aux2 On CAM
0123 Unit:01 00512
MON Aux1 Off CAM
0123 Unit:01 00512
MON Aux2 Off CAM
0123 Unit:01 00512
MON Def Off CAM
0123 Unit:01 00512
MON Def On CAM
0123 Unit:01 00512