Filter
Top Products
337
System Setup, Auxiliary Area Allocations, and Built-in I/O Allocations Appendix C
A562 00 Analog Output 1
Flags
User Adjustment Com-
pleted
Initial value is 0.
Set to 1 if user performs offset/gain adjustment and
Returns to factory default setting of 0 if adjustment
value is cleared.
Module
01 to 03 Reserved ---
04 Operating ON: ON while the analog output is being changed by
ACC(888).
OFF: Turned OFF when target value is reached.
05 to 07 Reserved ---
08 Output SV Error ON: ON when the output SV setting is outside of the
allowed setting range.
OFF: OFF when the output SV is within range.
Note Only for END refresh.
09 to 11 Reserved ---
12 Factory Adjustment Value
Error
ON: ON when the factory-set data stored in flash
memory is invalid.
OFF: OFF when the factory-set data stored in flash
memory is normal.
13 Reserved ---
14 User Adjustment Value
Error
ON: ON when the user-set adjustment value stored
in flash memory is invalid.
OFF: OFF when the user-set adjustment value
stored in flash memory is normal.
15 Reserved ---
A563 00 Analog Output 2
Flags
User Adjustment Com-
pleted
Same as for Analog Output 1 Flags.
01 to 03 Reserved
04 Operating
05 to 07 Reserved
08 Output SV Error
09 to 11 Reserved
12 Factory Adjustment Value
Error
13 Reserved
14 User Adjustment Value
Error
15 Reserved
Address Bits Name Function Controlled
by